Gentoo Packages

Search

Install

Install this package:

emerge -a net-wireless/wpa_supplicant

Package Information

Description:

IEEE 802.1X/WPA supplicant for secure wireless transfers

Homepage:

https://w1.fi/wpa_supplicant/

License:

|| ( GPL-2 BSD )

Versions

Metadata

Maintainers

• Rick Farina (zerochaos@gentoo.org) - Type: person

Upstream

• Remote IDs:
  • cpe: cpe:/a:wpa_supplicant:wpa_supplicant

<pkgmetadata>
	<maintainer type="person">
		<email>zerochaos@gentoo.org</email>
		<name>Rick Farina</name>
	</maintainer>
	<use>
		<flag name="ap">Add support for access point mode</flag>
		<flag name="broadcom-sta">Flag to help users disable features not supported by broadcom-sta driver</flag>
		<flag name="eap-sim">Add support for EAP-SIM authentication algorithm</flag>
		<flag name="eapol-test">Build and install eapol_test binary</flag>
		<flag name="fasteap">Add support for FAST-EAP authentication algorithm</flag>
		<flag name="fils">Add support for Fast Initial Link Setup (802.11ai)</flag>
		<flag name="hs2-0">Add support for 802.11u and Passpoint for HotSpot 2.0</flag>
		<flag name="macsec">Add support for wired macsec</flag>
		<flag name="mbo">Add support Multiband Operation</flag>
		<flag name="mesh">Add support for mesh mode</flag>
		<flag name="p2p">Add support for Wi-Fi Direct mode</flag>
		<flag name="ps3">Add support for ps3 hypervisor driven gelic wifi</flag>
		<flag name="privsep">Enable wpa_priv privledge separation binary</flag>
		<flag name="tdls">Add support for Tunneled Direct Link Setup (802.11z)</flag>
		<flag name="uncommon-eap-types">Add support for GPSK, SAKE, GPSK_SHA256, IKEV2 and EKE</flag>
		<flag name="wps">Add support for Wi-Fi Protected Setup</flag>
		<flag name="wimax">Add support for Wimax EAP-PEER authentication algorithm</flag>
		<flag name="smartcard">Add support for smartcards</flag>
	</use>
	<upstream>
		<remote-id type="cpe">cpe:/a:wpa_supplicant:wpa_supplicant</remote-id>
	</upstream>
</pkgmetadata>

Lint Warnings

• [Warning] Ebuild 9999 uses POSIX test '['. Use bash conditions '[[ ... ]]' instead.
• [Warning] Ebuild 9999 uses POSIX test '['. Use bash conditions '[[ ... ]]' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$setting'. Use '${setting}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$setting'. Use '${setting}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$setting'. Use '${setting}' instead.
• [Warning] Ebuild 9999 uses POSIX test '['. Use bash conditions '[[ ... ]]' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$setting'. Use '${setting}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses unbracketed variable '$CONFIG_PARAM'. Use '${CONFIG_PARAM}' instead.
• [Warning] Ebuild 9999 uses POSIX test '['. Use bash conditions '[[ ... ]]' instead.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 23.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 77.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 79.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 85.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 97.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 122.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 126.
• [Warning] Ebuild 9999 uses spaces for indentation on line 131.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 451.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 452.
• [Warning] Ebuild 9999 has a line exceeding 80 positions on line 456.
• [Warning] Ebuild 9999 calls 'systemd_dounit' conditionally based on a USE flag. Small files must be installed unconditionally (PG0301).
• [Warning] USE flag 'bindist' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'dbus' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'elibc_uclibc' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'qt5' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'readline' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'selinux' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'kernel_linux' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'kernel_FreeBSD' in ebuild 9999 is not documented in metadata.xml
• [Error] Repository is missing a repo-name in metadata/layout.conf or profiles/repo_name
• [Warning] Ebuild 9999 uses USE flag 'selinux' purely for an optional RDEPEND. USE-controlled optional RDEPs are not acceptable except under very specific circumstances (PG0001).
• [Warning] Ebuild 9999 uses historic toolkit flag 'qt5' but lacks the 'gui' flag. The 'gui' flag must be used to control optional GUI support.
• [Warning] Ebuild 9999 uses a regular USE flag 'elibc_uclibc' containing an underscore. Underscores are reserved for USE_EXPAND flags.
• [Warning] Ebuild 9999 uses a regular USE flag 'kernel_linux' containing an underscore. Underscores are reserved for USE_EXPAND flags.
• [Warning] Ebuild 9999 uses a regular USE flag 'kernel_FreeBSD' containing an underscore. Underscores are reserved for USE_EXPAND flags.

USE Flags

Manage flags for this package: euse -i <flag> -p net-wireless/wpa_supplicant | euse -E <flag> -p net-wireless/wpa_supplicant | euse -D <flag> -p net-wireless/wpa_supplicant

Files

• rebased-v2.6-0001-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch
• wpa_cli.sh
• wpa_supplicant-2.6-do-not-call-dbus-functions-with-NULL-path.patch
• wpa_supplicant-2.6-libressl-compatibility.patch
• wpa_supplicant-2.6-openssl-1.1.patch
• wpa_supplicant-2.7-fix-undefined-remove-ie.patch
• wpa_supplicant-2.7-libressl.patch
• wpa_supplicant-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch
• wpa_supplicant-conf.d
• wpa_supplicant-init.d
• wpa_supplicant-uclibc-fix.patch
• wpa_supplicant.conf

Manifest