Gentoo Packages

Search

Install

Install this package:

emerge -a media-gfx/prusaslicer

If the package is masked, you can unmask it using the autounmask tool or standard emerge options:

autounmask media-gfx/prusaslicer

Or alternatively:

emerge --autounmask-write -a media-gfx/prusaslicer

Package Information

Description:

PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap community.

Homepage:

https://www.prusa3d.com/prusaslicer/

License:

AGPL-3 Boost-1.0 GPL-2 LGPL-3 MIT

Versions

Metadata

Description

• PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap community.

Maintainers

• Gentoo 3D Printer Project (3dprint@gentoo.org) - Type: project

Upstream

• Bugs: https://github.com/prusa3d/PrusaSlicer/issues
• Remote IDs:
  • cpe: cpe:/a:prusa3d:prusaslicer
  • github: prusa3d/PrusaSlicer

<pkgmetadata>
	<maintainer type="project">
		<email>3dprint@gentoo.org</email>
		<name>Gentoo 3D Printer Project</name>
	</maintainer>
	<longdescription>
		PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG
		layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including
		all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and
		Machinekit controllers.

		PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap community.
	</longdescription>
	<upstream>
		<doc>https://help.prusa3d.com/en/article/general-info_1910</doc>
		<bugs-to>https://github.com/prusa3d/PrusaSlicer/issues</bugs-to>
		<remote-id type="cpe">cpe:/a:prusa3d:prusaslicer</remote-id>
		<remote-id type="github">prusa3d/PrusaSlicer</remote-id>
	</upstream>
</pkgmetadata>

Lint Warnings

• [Warning] USE flag 'test' in ebuild 9999 is not documented in metadata.xml
• [Warning] USE flag 'test' in ebuild 2.9.4 is not documented in metadata.xml
• [Error] Missing md5-cache for ebuild prusaslicer-9999
• [Error] Missing md5-cache for ebuild prusaslicer-2.9.4

USE Flags

Manage flags for this package: euse -i <flag> -p media-gfx/prusaslicer | euse -E <flag> -p media-gfx/prusaslicer | euse -D <flag> -p media-gfx/prusaslicer

Files

• prusaslicer-2.6.0-dont-force-link-to-wayland-and-x11.patch
• prusaslicer-2.8.1-boost-1.87.patch
• prusaslicer-2.8.1-cgal-6.0.patch
• prusaslicer-2.8.1-fix-libsoup-double-linking.patch
• prusaslicer-2.8.1-fstream.patch
• prusaslicer-2.8.1-opencascade-7.8.0.patch
• prusaslicer-2.9.2-boost-1.88.patch
• prusaslicer-2.9.4-boost-1.89.patch

Manifest