Gentoo Packages

net-misc/r8125 (gentoo)

Search

Install

Install this package:

emerge -a net-misc/r8125

Package Information

Description:
Official Realtek r8125 vendor linux driver. This driver supports NICs based on RTL8125 family.
Homepage:
https://www.realtek.com/Download/List?cate_id=584
License:
GPL-2

Versions

Version EAPI Keywords Slot
9.018.00 8 ~amd64 ~x86 0
9.016.01 8 amd64 ~x86 0
9.016.00 8 amd64 x86 0
9.015.00 8 ~amd64 ~x86 0
9.014.01 8 ~amd64 ~x86 0
9.014.01 8 amd64 x86 0
9.013.02 8 amd64 x86 0

Metadata

Description

Maintainers

Raw Metadata XML 
<pkgmetadata>
	<maintainer type="person" proxied="yes">
		<email>k2k@drgrin.dev</email>
		<name>Evgeny Grin</name>
	</maintainer>
	<maintainer type="project" proxied="proxy">
		<email>proxy-maint@gentoo.org</email>
		<name>Proxy Maintainers</name>
	</maintainer>
	<longdescription>Official Realtek r8125 vendor linux driver. This driver supports NICs based on RTL8125 family.</longdescription>
	<use>
		<flag name="dash">Enable support for DMTF DASH out-of-band system management</flag>
		<flag name="down-speed-100">Reduce speed to 100 Mbps in WOL-only modes</flag>
		<flag name="eee">Enable Energy-Efficient Ethernet by default</flag>
		<flag name="fiber">Enable Fiber PHY support</flag>
		<flag name="giga-lite">Enable support of &#34;Giga Lite&#34; (500 Mbps over just two CAT5 pairs) by default</flag>
		<flag name="hw-acceleration">Enable use of hardware acceleration by default. HW acceleration may cause problems on Realtek NICs!</flag>
		<flag name="hw-optim-tx">Enable hardware optimised TX (&#34;TX No Close&#34; driver option) by default</flag>
		<flag name="multi-tx-q">Enable Multiple Tx Queue (&#34;RSS&#34; for sending)</flag>
		<flag name="ptp">Enable Precision Time Protocol support</flag>
		<flag name="rss">Enable Receive Side Scaling (RSS)</flag>
		<flag name="s5-keep-mac">Keep set MAC address in S5 (switched off) by default</flag>
		<flag name="use-firmware">Enable support for automatic firmware loading</flag>
		<flag name="wol">Enable Wake-On-LAN by default</flag>
		<flag name="wol-s5">Enable start from S5 (switched off) by Wake-On-LAN by default</flag>
	</use>
</pkgmetadata>

Lint Warnings

USE Flags

Manage flags for this package: euse -i <flag> -p net-misc/r8125 | euse -E <flag> -p net-misc/r8125 | euse -D <flag> -p net-misc/r8125

Flag Description 9.018.00 9.016.01 9.016.00 9.015.00 9.014.01 9.014.01 9.013.02
dash Enable support for DMTF DASH out-of-band system management ✓ ✓ ✗ ✗ ✗ ✗ ✗
down-speed-100 Reduce speed to 100 Mbps in WOL-only modes ✓ ✓ ✓ ✓ ✓ ✓ ✗
eee Enable Energy-Efficient Ethernet by default ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ✗
fiber Enable Fiber PHY support ✓ ✓ ✓ ⊕ ✗ ✗ ✗
giga-lite Enable support of &#34;Giga Lite&#34; (500 Mbps over just two CAT5 pairs) by default ⊕ ⊕ ⊕ ⊕ ✗ ✗ ✗
hw-acceleration Enable use of hardware acceleration by default. HW acceleration may cause problems on Realtek NICs! ✓ ✓ ✓ ✓ ✓ ✓ ✗
hw-optim-tx Enable hardware optimised TX (&#34;TX No Close&#34; driver option) by default ✓ ✓ ✓ ✓ ✓ ✓ ✗
multi-tx-q Enable Multiple Tx Queue (&#34;RSS&#34; for sending) ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕
ptp Enable Precision Time Protocol support ✓ ✓ ✓ ✓ ✓ ✓ ✓
rss Enable Receive Side Scaling (RSS) ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ⊕
s5-keep-mac Keep set MAC address in S5 (switched off) by default ✓ ✓ ✓ ✓ ✓ ✓ ✗
use-firmware Enable support for automatic firmware loading ✓ ✓ ✓ ✓ ✓ ✓ ✓
wol Enable Wake-On-LAN by default ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ✗
wol-s5 Enable start from S5 (switched off) by Wake-On-LAN by default ⊕ ⊕ ⊕ ⊕ ⊕ ⊕ ✗

Files

Manifest

Type File Size Versions
DIST r8125-9.013.02.tar.bz2 105923 bytes 9.013.02
DIST r8125-9.014.01.tar.bz2 111465 bytes 9.014.01
DIST r8125-9.015.00.tar.bz2 112287 bytes 9.015.00
DIST r8125-9.016.00.tar.bz2 122011 bytes 9.016.00
DIST r8125-9.016.01.tar.bz2 124146 bytes 9.016.01
DIST r8125-9.018.00.tar.bz2 124544 bytes 9.018.00
Unmatched Entries
Type File Size