| Flag |
Description |
| athena |
Enable support for AWS Athena |
| avatica |
Enable support for Apache Avatica |
| bigquery |
Enable support for Google BigQuery |
| cassandra |
Enable support for Cassandra |
| chai |
Enable support for ChaiSQL |
| cosmos |
Enable support for Azure Cosmos |
| couchbase |
Enable support for Couchbase |
| csvq |
Enable support for CSVQ |
| databend |
Enable support for Databend |
| databricks |
Enable support for Databricks |
| duckdb |
Enable support for DuckDB |
| dynamodb |
Enable support for DynamoDB |
| exasol |
Enable support for Exasol |
| flightsql |
Enable support for FlightSQL |
| h2 |
Enable support for Apache H2 |
| hdb |
Enable support for SAP HANA |
| hive |
Enable support for Apache Hive |
| ignite |
Enable support for Apache Ignite |
| impala |
Enable support for Apache Impala |
| maxcompute |
Enable support for Alibaba MaxCompute |
| netezza |
Enable support for IBM Netezza |
| presto |
Enable support for Presto |
| ql |
Enable support for Cznic QL |
| ramsql |
Enable support for RamSQL |
| sapase |
Enable support for SAP ASE |
| saphana |
Enable support for SAP HANA |
| snowflake |
Enable support for Snowflake |
| spanner |
Enable support for Google Spanner |
| tablestore |
Enable support for Alibaba Tablestore |
| tds |
Enable support for SAP ASE |
| trino |
Enable support for Trino |
| vertica |
Enable support for Vertica |
| voltdb |
Enable support for VoltDB |
| ydb |
Enable support for YDB |
| Flag |
Description |
| ${IUSE/+module-store-files/+module-store-files} |
|
| module-auth-always-online |
Enable build of "Always Online" authentication module for Stargazer. |
| module-auth-freeradius |
Enable build of "Radius" authentication module for Stargazer. This module capable of using RADIUS procotol for user authentication. |
| module-auth-internet-access |
Enable build of "InetAccess" authentication module for Stargazer. InetAccess is a Stargazer specific authentication protocol. |
| module-capture-ether |
Enable build of "Ethernet" traffic capture module for Stargazer. This module uses RAW sockets to capture traffic. |
| module-capture-netflow |
Enable build of "NetFlow" traffic capture module for Stargazer. This module capable of receiving traffic data by NetFlow protocol. |
| module-capture-nfqueue |
Enable build of "NFQUEUE" traffic capture module for Stargazer. This module uses NFQUEUE subsystem to capture traffic. |
| module-config-rpcconfig |
Enable build of "XMLRPC" configuration module for Stargazer. This module uses XML-RPC protocol for configuring Stargazer. |
| module-config-sgconfig |
Enable build of "SGConf" configuration module for Stargazer. This module uses Stargazer specific protocol for configuring Stargazer. |
| module-other-ping |
Enable build of "Ping" module for Stargazer. This module pings connected users from time to time to ensure they are alive. |
| module-other-remote-script |
Enable build of "Remote Script" module for Stargazer. This module control rscriptd daemon over the net and makes it execute scripts in reaction to different Stargazer events. |
| module-other-smux |
Enable build of SMUX module for Stargazer. This module uses SMUX protocol to provide various information about Stargazer. |
| module-store-files |
Enable build of storage plugin for Stargazer based on plain files. |
| module-store-mysql |
Enable build of storage plugin for Stargazer, which uses MySQL for storage. |
| module-store-postgres |
Enable build of storage plugin for Stargazer, which uses PostgreSQL for storage. |
| radius |
Enable build of FreeRADIUS module for data access via Stargazer. |
| rscriptd |
Enable build of remote script execute daemon for Stargazer, which run scripts when receive special signal from Stargazer. |
| sgauth |
Enable build of command-line utility for authorization in Stargazer. |
| sgconf |
Enable build of command-line utility for configuring Stargazer. |
| sgconf-xml |
Enable build of command-line xml-based utility for configuring Stargazer. |
| sgconv |
Enable build of utility to convert Stargazer data between storage backends. |
| stargazer |
Enable build of Stargazer billing system. |
| Flag |
Description |
| ${design} |
|
| adminer-js |
Plugin. Enable auto-detection and inclusion of adminer.js, like adminer.css |
| brade |
Design. CSS style |
| bueltge |
Design. CSS style |
| cvicebni-ubor |
Design. CSS style |
| database-hide |
Plugin. Hide some databases from the interface - just to improve design, not a security plugin |
| design |
Install custom design CSS style |
| designs |
Plugin. Allow switching designs |
| dracula |
Design. CSS style |
| dump-alter |
Plugin. Exports one database so that it can be synced with other database |
| dump-bz2 |
Plugin. Dump to Bzip2 format |
| dump-date |
Plugin. Include current date and time in export filename |
| dump-json |
Plugin. Dump to JSON format |
| dump-php |
Plugin. Dump to PHP format |
| dump-xml |
Plugin. Dump to XML format |
| dump-zip |
Plugin. Dump to ZIP format |
| edit-calendar |
Plugin. Display jQuery UI Timepicker for each date and datetime field |
| edit-foreign |
Plugin. Select foreign key in edit form |
| edit-textarea |
Plugin. Use textarea for char and varchar |
| editor |
Install AdminerEvo Editor |
| elasticsearch |
Plugin driver for Elasticsearch |
| email-table |
Plugin. Get e-mail subject and message from database (Adminer Editor) |
| enum-option |
Plugin. Use select-option for enum |
| enum-types |
Plugin. Use select-option for enum edit instead of regular input text on enum type in PostgreSQL |
| esterka |
Design. CSS style |
| file-upload |
Plugin. Edit fields ending with _path by input type="file" and link to the uploaded files from select |
| flat |
Design. CSS style |
| foreign-system |
Plugin. Link system tables (in mysql and information_schema databases) by foreign keys |
| frames |
Plugin. Allow using Adminer inside a frame |
| galkaev |
Design. CSS style |
| haeckel |
Design. CSS style |
| hever |
Design. CSS style |
| hydra |
Design. CSS style |
| import-from-dir |
Plugin. Import SQL files from a directory |
| json-column |
Plugin. Display JSON values as table in edit |
| jukin |
Design. CSS style |
| kahi |
Design. CSS style |
| konya |
Design. CSS style |
| login-external |
Plugin. Enables use of saved credentials for accessing a database |
| login-ip |
Plugin. Check IP address and allow empty password |
| login-otp |
Plugin. Require One Time Password at login |
| login-password-less |
Plugin. Enable login without password |
| login-servers |
Plugin. Display constant list of servers in login form |
| login-ssl |
Plugin. Connect to MySQL using SSL |
| login-table |
Plugin. Authenticate a user from the login table |
| lucas-sandery |
Design. CSS style |
| mancave |
Design. CSS style |
| mancave-hever |
Design. CSS style |
| master-slave |
Plugin. Execute writes on master and reads on slave |
| mongodb |
Plugin driver for MongoDB |
| mvt |
Design. CSS style |
| nette |
Design. CSS style |
| ng9 |
Design. CSS style |
| nicu |
Design. CSS style |
| oci8-instant-client |
|
| pappu687 |
Design. CSS style |
| paranoiq |
Design. CSS style |
| pepa-linha |
Design. CSS style |
| pepa-linha-dark |
Design. CSS style |
| pilot |
Design. CSS style |
| plugin |
Required to run any plugin |
| pokorny |
Design. CSS style |
| pretty-json-column |
Pretty print JSON values in edit |
| price |
Design. CSS style |
| rmsoft |
Design. CSS style |
| rmsoft-blue |
Design. CSS style |
| simpledb |
Plugin driver for SimpleDB |
| slugify |
Plugin. Prefill field containing _slug with slugified value of a previous field (JavaScript) |
| sql-log |
Plugin. Log all queries to SQL file |
| struct-comments |
Plugin. Show comments of sql structure in more places (mainly where you edit things) |
| table-indexes-structure |
Plugin. Expanded table indexes structure output |
| table-structure |
Plugin. Expanded table structure output |
| tables-filter |
Plugin. Filter names in tables list |
| tinymce |
Plugin. Edit all fields containing _html by HTML editor TinyMCE and display the HTML in select |
| translation |
Plugin. Translate all table and field comments, enum and set values from the translation table |
| version-noverify |
Plugin. Disable version checker |
| wymeditor |
Plugin. Edit all fields containing _html by HTML editor WYMeditor and display the HTML in select |
| Flag |
Description |
| aio |
Enable asynchronous I/O support |
| angie_ |
|
| angie_modules_http_access |
Add support for a simple host-based access control |
| angie_modules_http_acme |
Add support for automatic certificate acquisition though the use of ACME protocol |
| angie_modules_http_addition |
Add support for adding contents of other locations before and after the current location's content |
| angie_modules_http_api |
Add support for HTTP RESTful interface |
| angie_modules_http_auth_basic |
Add support for limiting access to a location by validating the username and password using the HTTP Basic Authentication |
| angie_modules_http_auth_request |
Add support for client authorization based on the result of a subrequest |
| angie_modules_http_autoindex |
Add support for processing requests ending with the slash character ('/') and produciing a directory listing |
| angie_modules_http_browser |
Add support for creating variables whose values depend on the value of the "User-Agent" request header field |
| angie_modules_http_charset |
Add support for adding the specified charset to the "Content-Type" response header field and reencoding singe-byte charsets |
| angie_modules_http_dav |
Add support for the WebDAV functionality and methods: PUT, DELETE, MKCOL, COPY and MOVE |
| angie_modules_http_degradation |
Add support for returning 204 or 444 code for some locations on low memory condition (reliable on FreeBSD only) |
| angie_modules_http_docker |
Add support for dynamic updating of proxied server groups based on Docker (or Podman) container labels |
| angie_modules_http_empty_gif |
Add support for emiting a single-pixel transparent GIF |
| angie_modules_http_fastcgi |
Add support for passing requests to a FastCGI server |
| angie_modules_http_flv |
Add support for the server-side pseudo-streaming of Flash Video (FLV) files |
| angie_modules_http_geo |
Add support for creating variables whose values depend on the client IP-address |
| angie_modules_http_geoip |
Add support for creating variables whose values depend on the client IP-address, using the precompiled MaxMind databases |
| angie_modules_http_grpc |
Add support for passing requests to a gRPC server |
| angie_modules_http_gunzip |
Add support for decompressing responses with "Content-Encoding: gzip" for clients that do not support "gzip" encoding method |
| angie_modules_http_gzip |
Add support for compressing responses using the "gzip" method |
| angie_modules_http_gzip_static |
Add support for sending precompressed files with the ".gz" filename extension instead of regular files |
| angie_modules_http_image_filter |
Add support for transforming images in JPEG, GIF, PNG, and WebP formats |
| angie_modules_http_limit_conn |
Add support for limiting the number of connections per a defined key, e.g. the number of connections from a single IP address |
| angie_modules_http_limit_req |
Add support for limiting the request processing rate per a defined key, e.g. the processing rate of requests coming from a single IP address |
| angie_modules_http_map |
Add support for creating variables whose values depend on values of other variables |
| angie_modules_http_memcached |
Add support for obtaining responses from a memcached server |
| angie_modules_http_mirror |
Add support for mirroring of the original request by creating background mirror subrequests |
| angie_modules_http_mp4 |
Add support for server-side pseudo-streaming for MP4 files |
| angie_modules_http_perl |
Add support for implementing location and variable handlers in Perl and inserting Perl calls into SSI |
| angie_modules_http_prometheus |
Add support for export of varied statistics metrics in Prometheus format |
| angie_modules_http_proxy |
Add support for passing subrequests to another server |
| angie_modules_http_random_index |
Add support for processing requests ending with the slash character ('/') by picking a random file in a directory to serve as an index file |
| angie_modules_http_realip |
Add support for setting the client address and optional port to those sent in the specified header field (e.g. "X-Real-IP" or "X-Forwarded-For") |
| angie_modules_http_referer |
Add support for blocking access to a site for requests with invalid values in the "Referer" header field |
| angie_modules_http_rewrite |
Add support for changing the request URI using PCRE regular expressions, returning redirects, and conditionally selecting configurations |
| angie_modules_http_scgi |
Add support for passing requests to an SCGI server |
| angie_modules_http_secure_link |
Add support for checking authenticity of requested links, protecting resources from unauthorized access, and limiting link lifetime |
| angie_modules_http_slice |
Add support for spliting a request into subrequests, each returning a certain range of response |
| angie_modules_http_split_clients |
Add support for creating variables suitable for A/B testing, also known as split testing |
| angie_modules_http_ssi |
Add support for processing SSI (Server Side Includes) commands in responses passing through NGINX |
| angie_modules_http_stub_status |
Add support for providing access to basic status information |
| angie_modules_http_sub |
Add support for modifying a response by replacing one specified string by another |
| angie_modules_http_upstream_hash |
Add support for distributing upstream requests based on hashed key value |
| angie_modules_http_upstream_ip_hash |
Add support for distributing upstream requests based on the IP-address of the client |
| angie_modules_http_upstream_keepalive |
Add support for caching connections to upstream servers |
| angie_modules_http_upstream_least_conn |
Add support for passing upstream requests to the server with the least number of active connections |
| angie_modules_http_upstream_random |
Add support for passing upstream requests to a randomly selected server |
| angie_modules_http_upstream_sticky |
Add support for sticky sessions mode where all connections in the session are routed to the same server |
| angie_modules_http_upstream_zone |
Add support for defining a shared memory zone that keeps the group's configuration and run-time state that are shared between worker processes |
| angie_modules_http_userid |
Add support for setting cookies suitable for client identification |
| angie_modules_http_uwsgi |
Add support for passing requests to a uwsgi server |
| angie_modules_http_xslt |
Add support for transforming XML responses using one or more XSLT stylesheets |
| angie_modules_mail_ |
|
| angie_modules_mail_${mod} |
|
| angie_modules_mail_imap |
Add support for proxying IMAP messages |
| angie_modules_mail_pop3 |
Add support for proxying POP3 messages |
| angie_modules_mail_smtp |
Add support for proxying SMTP messages |
| angie_modules_stream_access |
Add support for a simple host-based access control |
| angie_modules_stream_acme |
Add support for automatic certificate acquisition though the use of ACME protocol |
| angie_modules_stream_geo |
Add support for creating variables whose values depend on the client IP-address |
| angie_modules_stream_geoip |
Add support for creating variables whose values depend on the client IP-address, using the precompiled MaxMind databases |
| angie_modules_stream_limit_conn |
Add support for limiting the number of connections per a defined key, e.g. the number of connections from a single IP address |
| angie_modules_stream_map |
Add support for creating variables whose values depend on the values of other variables |
| angie_modules_stream_mqtt_preread |
Add support for extracting the username and client ID from the CONNECT packet of the MQTT protocol |
| angie_modules_stream_pass |
Add support for passing the accepted connection directly to any configured listening socket in "http", "stream", "mail", and other similar modules |
| angie_modules_stream_rdp_preread |
Add support for extraction of Cookie values from RDP connections |
| angie_modules_stream_realip |
Add support for setting the client address and optional port to those sent in the specified header field (e.g. "X-Real-IP" or "X-Forwarded-For") |
| angie_modules_stream_return |
Add support for sending a specified value to the client and then closing the connection |
| angie_modules_stream_set |
Add support for setting a value for a variable |
| angie_modules_stream_split_clients |
Add support for creating variables suitable for A/B testing, also known as split testing |
| angie_modules_stream_ssl_preread |
Add SSL/TLS protocol support to a stream proxy server |
| angie_modules_stream_upstream_hash |
Add support for distributing upstream requests based on hashed key value |
| angie_modules_stream_upstream_least_conn |
Add support for passing upstream requests to the server with the least number of active connections |
| angie_modules_stream_upstream_random |
Add support for passing upstream requests to a randomly selected server |
| angie_modules_stream_upstream_sticky |
Add support for sticky sessions mode where all connections in the session are routed to the same server |
| angie_modules_stream_upstream_zone |
Add support for defining a shared memory zone that keeps the group's configuration and run-time state that are shared between worker processes |
| http |
Enable core HTTP support |
| http-cache |
Enable HTTP cache support |
| http2 |
Enable HTTP2 module support |
| http3 |
Enable HTTP3 module support |
| libatomic |
Use <pkg>dev-libs/libatomic_ops</pkg> instead of builtin atomic operations |
| pcre-jit |
Enable JIT for pcre |
| pcre2 |
Enable support for pcre2 |
| rtmp |
NGINX-based Media Streaming Server |